Bathroom Bliss: Banishing Mould, Mildew And Hard Water Stains

Bathrooms must be sparkling clean for creating an aesthetically pleasing space and to ensure optimum hygiene. However, busy individuals fail to keep it sanitised since it demands regular cleaning. Improper cleaning makes the space damp and a shelter for fungus, bacteria, mould, mildew, and bad odours.

According to many experts, deep cleaning the bathroom every few weeks is crucial to prevent mildew and other buildup. High-traffic areas need to be cleaned more often, while others are fine with less frequent cleaning.

Hiring professionals who offer the best bond cleaning Hobart at the end of your tenancy is ideal. But, to maintain a blissful bathroom, it is important to use the right methods for dealing with common issues. Here is how to banish mould, mildew, and hard water stains. These steps include the use of cheap and eco-friendly cleaning products for the best results.

1. Kill Mould with Baking Soda

Baking soda is a household cleaner that effectively and naturally removes mould when mixed with water. Combine both ingredients in a spray bottle and spray directly on the surface. Allow it to sit for a few minutes, and follow up by wiping it with a moist cloth. Because baking soda acts as a natural disinfectant and is gentle, this solution will help get rid of mould without leaving behind unpleasant odours, ensuring a hygienic bathroom.

2. Use Hydrogen Peroxide for Mould

Hydrogen peroxide is another eco-friendly cleaner that is effective at dealing with mould, which is why end of lease cleaning Hobart professionals prefer using it. Simply spray 3% hydrogen peroxide directly onto the affected area and allow it to sit for about 10 minutes. Scrub it clean before wiping it with a moist cloth to get rid of any mould spore remnants.

Alternatively, combining hydrogen peroxide with vinegar will also create a suitable cleaner. After mixing both of them in a spray bottle, store the bottle in a dark area so that the light does not break down the potency of hydrogen peroxide.

3. Get Rid of Mildew With Vinegar

White vinegar should be your first choice for getting rid of mildew in the bathroom. It can easily remove mildew from the fixtures. The procedure is very straightforward. Simply fill a spray bottle with undiluted distilled white vinegar and spray it directly on the surfaces with mildew.

Allow it to sit for an hour. Use a moist cloth to wipe the surface. In case the mildew stains are stubborn, utilise 3% hydrogen peroxide. Simply pour it onto the affected area and wipe it clean with a damp cloth.

4. Clean Mildew from Grout

The grout in most bathrooms is often sealed. However, exposure to water, regular humidity, and soaps and shampoos can break down the seal over time. This means the dirt, grime, and mildew can stick to the grout which is unhealthy as well as unpleasant. To bring grout back to its original condition, bond cleaning Hobart experts recommend using DIY cleaning solutions to get the best results without causing any damage.

Mix equal parts lemon juice and vinegar and sufficient baking soda to create a paste. Utilise an old toothbrush and a paste to scrub the grout lines. Leave it for five minutes and rinse with warm water. When it comes to eliminating mildew from grout in hard-to-reach areas, using cotton balls is advisable. Soak a ball in 3% hydrogen peroxide and position it on the grout. Wait for a few hours and rinse the spot with warm water.

5. Use Baking Soda and Water for Hard Water Stains

The simple combination of baking soda and water works well when it comes to removing hard water stains. Simply mix water and baking soda in a ratio of 1:2. Adjust if needed to achieve the perfect consistency. Once ready, apply the solution to ceramic tiles and particularly the grout that has absorbed unpleasant hard water stains. Let it sit there for half an hour. Scrub away the stains with an old toothbrush and rinse with water.

Tip: When dealing with hard water stains during the end of tenancy cleaning, hire professionals who offer the best end of lease cleaning Hobart.

6. Remove Hard Water Stains Using Toothpaste

It might come as a surprise, but toothpaste is another household item that can be utilised for DIY cleaning, especially removing hard water stains. This is because it contains an ingredient known as fluoride, which effectively removes stains. So, before proceeding, ensure your toothpaste has this key ingredient.

Just distribute the paste equally on the affected area and let it stay there for at least 30 minutes so that it does its job. Follow up by scrubbing with an old toothbrush or a sponge. Remember that because toothpaste is a more expensive cleaner than other options, it is best to use it for smaller stains on surfaces like glass.

How to Get Rid of Mould, Mildew, and Hard Water Stains?

Wrapping Up

Maintaining a clean bathroom is not just ensuring it looks visually appealing but also about guaranteeing that it does can any harm to your health. So, following the right method and using the appropriate cleaning products becomes essential. Follow the tips mentioned in this article to keep your bathroom clean and free of mould, mildew and hard water stains.